KAT24

This decoder is a T4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but features the same operational characteristics. This decoder is compatible with any locomotive which uses the JST-9 interface.

 

• Keep-Alive®: Included on-board for smooth, stutter-free operation.

 

• Back EMF Load Compensation: Provides superior slow speed control and high performance under load.

 

• Quiet Drive: Super-quiet motor control for "buzz" free motor performance.

 

• DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

 

• Variable Momentum: Allows you to make custom acceleration and deceleration curves.

 

• Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.

 

• Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.

 

• Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!

 

• Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.

 

• Decoder Lock: Feature which prevents accidental/unwanted programming while activated.

 

• Airwire™ Compatible: Fully compatible with Airwire™ operation.

 

• User-Loadable Speed Tables: Configure custom speed curves and set speed limits.