tcs@tcsdcc.com | (215) 453-9145
- Decoder
The WOW101 is a universal sound decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is…
- Decoder
The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is…
- Decoder
The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The…
- Decoder
The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is…
- Product Notes
1. 2-Pin, Keep Alive® — Connect an external Keep Alive® here for testing. The 12v+ (blue wire) should be connected to the left pin socket with the Ground (black w/ white stripe wire) on the right.
2. 9-Pin JST — Use this connector with the provided 9-Pin…
- Product Notes
The DT-AUX board adds a JST9, MC JST, FL2 JST, and a WOW101 Auxiallary connection to your decoder tester. Plug this board directly into the screw terminals of the Decoder Tester and you will have a complete, plug in decoder test setup.
- Installation
This installation documentation is for a N-scale Boxcar manufactured by Bachmann. This installation was performed using a TCS WOW101 Diesel Decoder, KA3 Keep Alive® and 25x14mm WOWSpeaker.
Note: This installation can be performed using either a WOW101-KA-Steam or WOW101-KA-Diesel…
- Installation
This installation is for a HO-Scale Life Like Proto 2000 2-8-8-2 S1 using a TCS WOW101-Steam Decoder, KA3 Keep Alive® and 30mm WOWSpeaker kit.
- Installation
This is an alternative installation for the HO-Scale Kato RS-2 using a TCS WOW101-Diesel Decoder, KA4 with Keep Alive® and UNIV-SH4-C WOWSpeaker kit.
- Installation
This installation is for a N Scale Kato 4-6-2 Pacific Kitbash using a TCS WOW101-Steam decoder and was performed by Daniel Thomson.
Decoder install documented by TCS.
Note: This installation features an engine that has been kitbashed from a few different manufacturers parts.…
Top