4 Digit programming with MRC Prodigy Advance Squared system.





Problem: "I have installed a T1 decoder into the new Mantua / Model Power 0-6-0 tank locomotive. It is a plug-n-play application, and the T1 fits very well. I had tried to set the loco address to #10, but did not have any success; I also could not set it to an address of #110. Might I be doing something wrong? I ended up setting a 4-digit address (#1010), but am puzzled as to why it wouldn't accept the 2-digit or lower 100's 3-digit address. Any help or insights are greatly appreciated. "
To program to an address lower than 128 (2-digit), using the MRC Prodigy Advance Squared system, one needs to be programming on the programming track-addressing smaller than 127 cannot be accomplished on the main; Larger than 128 can be. Once the address is set, then the actual CV's can then be programmed on the main.
Like us on Facebook Subscribe to our YouTube Channel Join our newsletter
  Back To Top
Entire contents © Copyright Train Control Systems 2004-2018