This installation is for N Scale Fleischmann 739404 Electric Locomotive Class 1020 uses TCS EUN651P-18 digital decoder and was performed by A.G.

First remove the front and the rear shell by squeezing it on either side of the plastic covers and gently rocking it back and forth until it slips off the frame.


Now remove the main shell from the chassis by gently pulling it off.


Remove the weight. It will not be needed anymore.


Here is a picture of locomotive's chassis where you can see the 6 Pin NEMA socket.


Plug in our TCS EUN651P-18 exactly the way shown above.


Finished TCS decoder installation. Put the shell back together and we are ready to run this engine.

Like us on Facebook Subscribe to our YouTube Channel Join our newsletter
  Back To Top
Entire contents © Copyright Train Control Systems 2004-2018