This installation is for N-Scale Athearn EMD FP45, uses TCS K1D4 Digital Decoder, and was performed by AG .

The three upper pictures show the beautiful Athearn locomotive prior to the TCS K1D4 Installation.


Using Phillips screw driver remove both screw heads and de-attach front and rear couplers . Remove the shell by carefully pinching it on either side and rocking it back and forth while pulling upwards on it.


Here is a picture of the locomotive with its shell removed and original light board installed.


Remove the original light board by sliding it off to the side and up.


Drop-in our TCS K1D4 decoder and replace the shell and your locomotive is ready to run!

Like us on Facebook Subscribe to our YouTube Channel Join our newsletter
  Back To Top
Entire contents © Copyright Train Control Systems 2004-2018