KAM4P-SH

Decoder
SKU: 1486
$66.95 Buy Now
Description

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but features the same operational characteristics. The KAM4P-SH includes a short-length harness with 8-pin NMRA plug at the end.

  • Keep-Alive®:
  • Included on-board for smooth, stutter-free operation.

  • Back EMF Load Compensation:
  • Provides superior slow speed control and high performance under load.

  • Quiet Drive:
  • Super-quiet motor control for "buzz" free motor performance.

  • DC Mode:
  • Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

  • Incandescent Bulb Support:
  • This decoder can be used with 12 Volt bulbs.

  • Function Remapping:
  • Buttons 0 through 12 may be used to control the lighting functions of this decoder.

  • Programmable Lighting Effects:
  • Choose from 20 separate user-programmable lighting effects!

  • Dimmable Brightness:
  • Configure multiple different brightness levels for your LED's or incandescent bulbs.

  • Decoder Lock:
  • Feature which prevents accidental/unwanted programming while activated.

  • Airwire™ Compatible:
  • Fully compatible with Airwire™ operation.

  • User-Loadable Speed Tables:
  • Configure custom speed curves and set speed limits.

    Interface Type
    Direct-Plug (8-Pin NMRA)
    Dimensions (L x W x H): 0.945" x 0.657" x 0.33" or 24mm x 16.7mm x 8.38mm
    Scale: HO Scale
    Continuous/Peak: 1.0/2.0 Amp
    Total Functions: 4
    Function Rating: 200 mA
    12V Outputs
    4

    Decoder Literature

    KAM4.pdf

    Comprehensive Guides

    One Year Goof Proof Warranty

    All decoders are covered by a one year goof proof warranty. Please return in a small box.
    You MUST register the failed decoder on our website at tcsdcc.com/warranty
    Follow the instructions on the website before returning any decoders to TCS.